Applying examples for FC-94
Storehouse of metal materials and mechanical equipment
Prevention vehicle battery connector from corroding by sulfuric acid
Anti-oxidation for electrical and electronic equipment connector using the conductivity of FC-94

2. STRONG LOOSE ABILITY

FC-94 can absolve corrosion in a very short time and loose the adherent bond between metal oxide (rust) molecules because it contains powerful osmosis, while releasing drag and removing rusty means of lubrication without injuring the component.
It may occur that rust does not clear immediately (Up to date we still have not found the efficient loose agent over the world). You should spray FC-94 on the part to be loosed and wait for 15-20 minutes; you will find that will give the best results. We would advise you that you should not to use a special loose agent when you remove rusty parts. The main reason is that special loose agents must contain a corrosive substance. FC-94 users consider the product as the best loose agent they have used. The part loosen by FC-94 need not be rinsed because FC-94 remaining on the part can prevent the part rust again in a long time. FC-94 can make the re-used part easy to install.

Examples for FC-94 loose function
Loose rusty nut and bolt;
Loose rusty pipe connection, like valves and wyes etc.
Specific method: Beat the nut and bolt lightly after getting rid of the rust between them by the steel brush, then spray FC-94.Beat the bolt and nut lightly again 15-20 minutes later (Time would be shorter when rust isn¡¯t serious), and the bolt and nut can be taken down.

3. GOOD LUBRICATING PROPERTIES

The improved high efficient lubricating composition added to FC-94 can make FC-94 a powerful lubrication.
Its lubricating features include, no adhesion unlike general lubricating oil; unabsorbed dust and keep lubricated part clean for a long time due to no silica oil contents; form thin film on lubricated part by means of tiny spray, keep good and reliable lubricating performance while saving oil; high osmosis ensures full lubrication; its lubricated state makes it unhindered in tiny structures.
The measuring method is different between FC-94 and general machine oil and lubrication oil due to different properties. From Experiment Reports on Tribology of National Important Labs in Tsinghua University, FC-94 has good attrition resistance. It can be widely used in various temperatures (from ¨C50?C to 90?C), having no viscosity.

Examples:
Lubricate hinges of door or window, track way, roller chain of a bike, fly wheel.
Lubricate car window wiper and lock, make them easy to use.
Lubricate any rotary parts of mechanical equipment.
Lubricate any type of weapon equipment.

4. GOOD CLEAN FEATURE

Being of good clean feature, FC-94 can clean float rust, grease, sulfide, water and other dirt attached on metal surface and inside metal pore. FC-94 can prevent dirt from attaching itself with metal for an extended period of time.

Examples:
Clean carbon deposit and grease of vehicle spark plug, dirt of a carburetor and improving the exhaust quality of tail gas.
Clean weapon after sustaining fire and no pitted surface.

5. UNIQUE DEHUMIDIFICATION & WATERPROOF FEATURE

General known products were unable to have an affinity with metal surfaces, when the metal surface was wetted. FC-94 contains the necessary additives to remove water rapidly, so it can have an affinity for metal surface rapidly and isolate water from metal, prevent metal from becoming moist again. This performance can be demonstrated by following test; spray FC-94 on a smooth and clean armor plate which is all wet, beads will dip from the surface of standing or leaning armor plate. Another test; dip a new polished clean armor plate which is all wet into the FC-94 liquid in a standard lab, take it out and put the plate in a room of 100% relative humidity. The armor plate will be rusty in an hour if the water hasn¡¯t come out completely.

Example:
Put a general engine into water and then take it out of water, if powered on at once, the engine must be burned due to short-circuit; spray FC-94 upon the motor fully, including coil and circuit contact, the engine will run in normal. Spray FC-94 upon car divided plate, it can run at once.

6. HIGH INSULATIVITY &CONDUCTANCE

Breakdown voltage of FC-94 is 15,000V in 2.5 mm.
Its testing method is as follows: put FC-94 in the normal oil-testing cup, make the space between two discharging copperplates (diameter: 25mm) 2.5mm, then power is at 3000V/s. At 15,000V, the insulation breaks down.
FC-94 will be powerful when it combines other features of FC-94. This is FC-94¡¯s glamour as full function universal maintained agent. Attention please!!, high insolvability of FC-94 does not influence current flow in circuit. FC-94 thin film can recover rapidly, when pressure disappears, to protect contact metal from outside corrosion. This feature, as well as its dehumidification, make it able to dehumidify gases, avoid short-circuit, and move accordingly.

Examples:
Make the car distributor short-circuit by water, spray FC-94 on it to remove the water and the result is that the distributor can jump-start without drying it.
Maintain knife switch of power system to avoid poor contact